Menu

12/03/2012

Koner SRL

NEW LUBRICANTS FOR LOW AND MEDIUM CARBON CONTENT WIRE DRAWING

LUBRICANTS FOR DRY DRAWING OF WIRES TO BE ANNEALED OR GALVANISED
SPECIFIC REQUIREMENTS FOR THE NEW LUBRICANTS

• To provide adequate lubrication to the wire
• To contain no compounds that might cause oxidation in the annealing furnaces
• To dissolve easily in acid pickling solutions
THE NEW CALCIUM BASED LUBRICANTS TECNOLUBRE® FM/102P and TECNOLUBRE® FM/180X

• They are able to function at high drawing speeds and guarantee long die life
• They contain no additives that might cause the wire surface to colour during annealing or carbon residues to accumulate in the annealing furnaces
• A slight residue of ash remains on the surface of the wire after annealing which dissolves easily in acid pickling solutions
• Excellent adhesion of zinc to the wire surface
LUBRICANTS FOR WET DRAWING AND SKIN PASS OR FERROUS OR COPPERED WIRES
SPECIFIC REQUIREMENTS FOR THE NEW LUBRICANTS

• Excellent lubrication with low lubricant consumption
• Cleaning properties
• Wire runs freely during coiling and subsequent uncoiling of the wire
• Antioxidant properties for iron and copper
• Low foam generating power
• Products are not dangerous for man or the environment.
THE NEW EMULSIFIABLE LUBRICANTS SINTEK® FL/22 – FL/29 FOR WET WIRE DRAWING

• They are able to function at the highest drawing speeds and guarantee long die life even when used at low concentrations
• They rapidly remove the film of lubricant present on the surface of the wire resulting from the previous dry wire draft to produce final wire with a bright shiny surface
• Their special formulation allows them to function on the latest and most up-to-date drawing machines with no strong generation of foam
• They are completely biodegradable
THE NEW EMULSIFIABLE LUBRICANT AIRPROTECTOR® TS5 FOR SKIN-PASS OF FERROUS AND COPPERED WIRES

• They guarantee excellent lubrication
• They form an extremely light film of wax with very strong antioxidant properties
• The film of wax allows the wire to run extremely freely when coiling and subsequently uncoiling the wire. (example of uncoiling welding wire at constant speed which therefore guarantees uniform welding)
• The maximum formation of ash during the combustion stage makes it suitable for the production of high quality coppered or copper free (CO2) welding wire
• Product contains no alkaline salts and is therefore not an irritant for skin
• Completely biodegradable Many lubricants normally in use can contain dangerous compounds for humans and the environment such as heavy metals, nitrites, borates, sulphides, chlorides or mineral oils.

TECNOVO s.r.l. has developed this new line of lubricants without using any of these substances and this therefore guarantees that these products are “friendly to man and the environment”.