Main content of this page

Anchor links to the different areas of information in this page:

You are here: wire and Tube. Identic Content. Companies & Products. Online Showrooms.

Contact Persons

Show location in hall

EURODRAW WIRE EQUIPMENT SRL
Via Camillo Chiesa 19/21
20010 Pogliano Milanese, Italy

Phone: +39 0293 9631
Fax: +39 0293 963272
http://www.eurodraw.com

Interactive Plan

Product Categories
Product
Information
Wire drawing machines (dry, fine, multi) 2 Products
Metal coating (chemical, electroplating etc.)  
Wire rope machines 1 Product
WIRE DRAWING MACHINE TAKE-UPS

22.02.2016

Our wire drawing machines can be equipped with various types of take-ups depending the package that the customer requests:

Spoolers:

BOS/ BOM - Single horizontal spoolers with or without spool elevator
BOS2 - Double horizontal spoolers with semi automatic spool change
BVS - Single vertical spoolers
BVD - Double vertical spoolers with semi automatic spool change
BVS2 - win vertical spoolers
BOA - Fully automatic horizontal spooler

Coilers:

RVS - Vertical static coilers without drawing die
RVT - Vertical static coilers with drawing die
ROS - Horizontal static coiler without drawing die
ROT - Horizontal static coiler with drawing die
IC - Inverted stripper coiler
OC - Horizontal pit coiler

Accessories:

automatic width adjustment system for traverse of spooler
self correction system for spooler traverse system
wire clamp on traverse unit of spooler
pattern lay system on coilers
wire threading unit for large coilers
double trolley
three position platform for small coil production
automatic coil change over system
automatic coil strapping system

 

Link to further Information
WIRE ROD PAY-OFFS

22.02.2016

SM 3000 F - horizontal flipper type payoff. This unit is the most simple payoff and is suited for both high and low carbon wire rod applications. Two payoffs are placed side by side to ensure a continuous payoff. The unit can be loaded with coils up to 3000 Kg. The wire diameter range is from 5,50 mm to 8.00 mm

SM 3000 L - horizontal flipper type payoff for larger wire rod sizes. This unit is the most simple payoff and is suited for high carbon wire rod applications. Two payoffs are placed side by side to ensure a continuous payoff. The unit can be loaded with coils up to 3000 Kg. The wire diameter range is from 8,00 mm to 16.00 mm. A basket type snarl switch is usually installed between the payoff and the wire drawing machine.

RP 6000 FPM - Motorized Flyer type payoff. This unit is composed by a main bean on which are loaded two coils of wire rod. These coils are pushed with a motorized pusher up to the flyer arm that will unwind the wire and direct it into the wire drawing machine. The flyer arm is motorized. This unit ius suited only for high carbon wire from 5,50 to 8.00 mm.

RP 6000 LP - Flyer type payoff. This unit is composed by a main bean on which are loaded two coils of wire rod. These coils are pushed with a motorized pusher up to the flyer arm that will unwind the wire and direct it into the wire drawing machine. The flyer arm is idle and the rotation is due to wire pull. This unit is suited only for high carbon wire from 8,0 0 mm to 18,0 mm

Link to further Information
MULTI WIRE LINE PAY -OFF & TAKE-UPS

22.02.2016

GCREurodraw can propose a wide range of payoffs and take-ups at very competitive prices. Our range of equipment includes the following models:

PAYOFFS FOR COIL AND SPOOL PROCESSING:

PT /PTM type payoff, rotating platforms suitable to pay-off wire from spools or coils. These unit are particularly suitable for larger wire diameters.

SSF-V/VM type payoff, vertical axis flyer type payoff. These units are suitable to payoff wire from spools or coils and can be used for wire diameters ranging from 0.80 mm up to 4.20 mm. The M version is equipped with a motorized pulling capstan in order to limit the tension of the thinner wires throughout the line.

SSF-2V/VM type payoff, this unit is similar to the SSF-V but has to payoff positions in order to be able to have a non stop payoff operation.

SSF-O, type payoff, this unit is a horizontal axis flyer type payoff suitable for spools only.

PT/DB type payoff. These units are equipped with a vertical axis double block type accumulator and allow accumulation of the wire while the spools is being changed. The accumulator will load itself with wire before the spool ends and when the spool it being changed, will feed the line with wire. In this unit the spool is mounted with vertical axis on a rotating non motorized platform. Two platforms can be foreseen to speed up the spool change.

SP/DB type payoff. These units are very compact and are equipped with an horizontal axis double block type accumulator. The accumulator will load itself with wire before the spool ends and when the spool it being changed, will feed the line with wire. In this unit the spool is mounted with horizontal axis and is positioned under the accumulator.

SBW/ SBWM payoffs, these high speed payoff units are specific to bead wire and are equipped with a large pulling capstan and straightening rollers in order to obtain straight wire. The M version is motorized and used in combination with large capacity spools.

Link to further Information